ActiveFlame EF10122 GY Manuel d'instruction - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} ActiveFlame EF10122 GY. ActiveFlame EF10122 GY 13 pages.

Imprimer la page
Operation - (continued)
4
Operation with The DEMO Switch
Press the I /O switch to turn on/turn off the power for
heating system.When the switch is turned off, you still can
control the flame and background light, but the power for
heating system. If you want to open the heating function, pls
make sure the switch is turned on.
5
Remote Control Battery Replacement:
□ Replace with a CR2025 battery and follow the diagram at the
back of remote handset to install the new battery.
6
Drawers
□ For smoother operation, use 2 hands spaced apart evenly with
equal force to open and close the front drawers.
Maintenance, Care & Cleaning
1
Maintenance:
□ WARNING: Completely disconnect power before attempting any
maintenance or cleaning, to reduce the risk of fire or electric
shock. Maintenance should only be performed by a certified
technician.
2
Cleaning:
□ Before cleaning any parts of the fireplace make sure to first
turn off the controls and then unplug the unit from power
source.
□ CAUTION: Wait until the unit has completely cooled before
attempting any cleaning.
□ Cleaning Glass Panel: Remove dust with clean dry cloth.
Remove fingerprints and other marks from glass door by using
a clean damp cloth. Do not use abrasive cleaners or spray
liquids on glass door surfaces.
□ Metal and metal painted parts should be cleaned with clean
damp cloth only. Do not use abrasive cleaners or spray liquids
3
Anti-frost function
□ The fireplace has anti-frost function.
□ When the room temperature is below 32
time will be delayed by several minutes
4
Spotlight Replacement
NOTE: Contact [email protected] for replacements.
□ Pull down to remove the spotlights from the wooden frame
□ Pull out the wires until the quick connect plug is visible and
then disconnect.
□ Connect the wire of the new spotlight to the connector, and
then push the spotlight back into the spotlight receptacle.
10
F/0
C the start-up
0
0