ActiveFlame EF10122 GY Руководство по эксплуатации - Страница 10

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Крытый камин ActiveFlame EF10122 GY. ActiveFlame EF10122 GY 13 страниц.

Operation - (continued)

Operation with The DEMO Switch

Press the I /O switch to turn on/turn off the power for

heating system.When the switch is turned off, you still can

control the flame and background light, but the power for

heating system. If you want to open the heating function, pls

make sure the switch is turned on.

Remote Control Battery Replacement:

□ Replace with a CR2025 battery and follow the diagram at the

back of remote handset to install the new battery.

Drawers

□ For smoother operation, use 2 hands spaced apart evenly with

equal force to open and close the front drawers.

Maintenance, Care & Cleaning

Maintenance:

□ WARNING: Completely disconnect power before attempting any

maintenance or cleaning, to reduce the risk of fire or electric

shock. Maintenance should only be performed by a certified

technician.

Cleaning:

□ Before cleaning any parts of the fireplace make sure to first

turn off the controls and then unplug the unit from power

source.

□ CAUTION: Wait until the unit has completely cooled before

attempting any cleaning.

□ Cleaning Glass Panel: Remove dust with clean dry cloth.

Remove fingerprints and other marks from glass door by using

a clean damp cloth. Do not use abrasive cleaners or spray

liquids on glass door surfaces.

□ Metal and metal painted parts should be cleaned with clean

damp cloth only. Do not use abrasive cleaners or spray liquids

Anti-frost function

□ The fireplace has anti-frost function.

□ When the room temperature is below 32

time will be delayed by several minutes

Spotlight Replacement

NOTE: Contact [email protected] for replacements.

□ Pull down to remove the spotlights from the wooden frame

□ Pull out the wires until the quick connect plug is visible and

then disconnect.

□ Connect the wire of the new spotlight to the connector, and

then push the spotlight back into the spotlight receptacle.

F/0

C the start-up