Greatneck 80161 Manuel du propriétaire - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Greatneck 80161. Greatneck 80161 18 pages. High speed circular saw

Imprimer la page

WARNING:

only Great Neck replacement parts. Use

of any other part may create a hazard or

cause product damage.

DO NOT abuse power tools. Abusive

practices can damage the tool as well as

the workpiece.

WARNING:

modify tools or create accessories. Any

such alteration or modification is

misuse and could result in a hazardous

condition leading to possible serious

injury. It will also void the warranty.

CLEANING

DO NOT use solvents when cleaning

plastic parts. Most plastics are susceptible

to damage from various types of

commercial solvents and may be damaged

by their use. Use a clean cloth to remove

dirt, dust, oil, grease, etc.

WARNING:

allow brake fluids, gasoline, petroleum-

based products, penetrating oils, etc. to

come in contact with plastic parts. They

contain chemicals that can damage,

weaken or destroy plastic.

MAINTENANCE

When servicing, use

DO NOT attempt to

Do not at any time

It has been found that electric tools are

subjected to accelerated wear and possible

premature failure when they are used on

fiberglass boats and sports cars, wallboard,

spackling compounds or plaster. The chips

and grindings from these materials are

highly abrasive to electric tool parts such as

bearings, brushes, commutators, etc.

Consequently, it is not recommended that

this tool be used for extended work on any

fiberglass material, wallboard, spackling

compounds or plaster. During any use on

these materials it is extremely important

that the tool is cleaned frequently by

blowing out with an air jet.

WARNING:

goggles or safety glasses with side

shields during all sawing operations. It

is critical that you also wear safety

goggles or safety glasses with side

shields and a dust mask while blowing

dust out of the circular saw with an air

jet. Failure to take these safety

precautions could result in permanent

eye or lung damage.

LUBRICATION

All of the bearings in this circular saw are

lubricated with a sufficient amount of high-

grade lubricant for the life of the unit under

normal conditions. Therefore, no further

lubrication is required.

Always wear safety