AirCycler g2-k Manuel d'installation et d'utilisation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} AirCycler g2-k. AirCycler g2-k 11 pages.
Également pour AirCycler g2-k : Manuel de formation (20 pages), Manuel de test d'installation (2 pages), Manuel de test d'installation (2 pages)

3.0 NORMAL OPERATION DISPLAY

DISPLAY STATUS & SETTINGS

3.1 STATUS

To get detailed status information, press the UP arrow. The status screens are the same for both Calculated Flow and

Calculated Time modes.

3.1.1 MINUTES LEFT

The first screen is the number of minutes left in the period (hour). Pressing the UP arrow

again gets you to the next status screen

3.1.2 OUTSIDE AIR TIME ELAPSED

This display shows the number of minutes this period that the outside air damper has

been open with the central fan running.

3.1.3 EXHAUST RUN TIME*

This shows the elapsed run time of the exhaust fan for this time period.

3.1.4 EXHAUST DELAY TIME*

This shows the exhaust delay time set.

3.2 SETTINGS

3.2.1 CURRENT SETTINGS

By pressing the DOWN arrow during normal operation, the user can scroll through the current setting entered by the

installer.

For Calculated Flow mode the screens will show:

•

Required CFM set

•

Set measured outside air CFM

•

Set measured exhaust air CFM

•

Set exhaust fan delay time

For Calculated Time mode the screens will show:

•

Exhaust run time set*

•

Outside air time in minutes

•

Exhaust fan delay time*

•

If operating time is enabled:

•

Operating Time On

•

Operating Time Off

AC DOC 8.5

REV 11/21/2014