HID FARGO DTC ii Plus Manuel d'entretien - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} HID FARGO DTC ii Plus. HID FARGO DTC ii Plus 11 pages.
Également pour HID FARGO DTC ii Plus : Manuel de l'utilisateur (15 pages)
Imprimer la page
Powering
Trusted Identities
2.1 Adhesive cleaning card routine
Video link:
https://player.vimeo.com/video/679193087
The following diagram shows the location where the cleaning card is inserted into the printer.
1. Remove all cards from the card hopper.
2. Take out the ribbon cartridge and set it aside. Close the door.
3. Remove the paper backing from both sides of the cleaning card.
Note: Do not remove small liner strip, if a magnetic encoding module is installed in your printer.
4. Insert the cleaning card into the in-feed rollers of the card hopper.
5. Navigate through the onscreen menu to the Toolbox and select Clean Printer.
6. Guide the cleaning card into the printer, if necessary.
7. When the cleaning routine is completed, the cleaning card exits the printer.
8. Discard the cleaning card as it is a one-time use item.
9. Re-install the ribbon.
10. Re-install all cards that were removed.
PLT-06335, A.0
7
HID® FARGO® DTC™ii and DTCii Plus
Recommended Maintenance
February 2022