HID FARGO DTC ii Plus 유지 관리 매뉴얼 - 페이지 7

{카테고리_이름} HID FARGO DTC ii Plus에 대한 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HID FARGO DTC ii Plus 11 페이지.
HID FARGO DTC ii Plus에 대해서도 마찬가지입니다: 사용자 설명서 (15 페이지)

페이지 인쇄
HID FARGO DTC ii Plus 유지 관리 매뉴얼
Powering
Trusted Identities
2.1 Adhesive cleaning card routine
Video link:
https://player.vimeo.com/video/679193087
The following diagram shows the location where the cleaning card is inserted into the printer.
1. Remove all cards from the card hopper.
2. Take out the ribbon cartridge and set it aside. Close the door.
3. Remove the paper backing from both sides of the cleaning card.
Note: Do not remove small liner strip, if a magnetic encoding module is installed in your printer.
4. Insert the cleaning card into the in-feed rollers of the card hopper.
5. Navigate through the onscreen menu to the Toolbox and select Clean Printer.
6. Guide the cleaning card into the printer, if necessary.
7. When the cleaning routine is completed, the cleaning card exits the printer.
8. Discard the cleaning card as it is a one-time use item.
9. Re-install the ribbon.
10. Re-install all cards that were removed.
PLT-06335, A.0
7
HID® FARGO® DTC™ii and DTCii Plus
Recommended Maintenance
February 2022