Gainlab Audio GL-TC1 Manuel - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Gainlab Audio GL-TC1. Gainlab Audio GL-TC1 16 pages. Dictator stereo vari-m compressor

Imprimer la page

LEFT, RIGHT METERS

MECHANICAL RESET FOR THE METERS

With the device turned oﬀ, use a straight slotted screwdriver to turn the

mechanical reset screw until the pointer is in the center of the 20-point value on

the lower scale.

METER MODE SWITCH

Speciﬁes whether the instrument clusters show the degree of

compression or the output signal level. Set the mode switch to

the up position to check the amount of compression. Set the

mode switch to the down position to check the output signal

level.

DICTATOR STEREO VARI-μ COMPRESSOR

The meters provide information - optionally -

on the magnitude of the signal level leaving the

unit or the degree of interference from the

compressor.

Being a stereo compressor, the right-hand VU

meter shows the levels for the right channel,

while the left-hand VU meter shows the levels

for the left channel. Meter units express values

in Volume Units (VU).

! 4