Gainlab Audio GL-TC1 Manuel - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Gainlab Audio GL-TC1. Gainlab Audio GL-TC1 16 pages. Dictator stereo vari-m compressor
Imprimer la page
!
INPUT LEVEL SWITCH
OUTPUT LEVEL SWITCH
COMPRESSION RATIO, BYPASS
!
DICTATOR STEREO VARI-μ COMPRESSOR
With the help of the input signal level controller, it is
possible to increase the signal level entering the device if,
for example, it does not reach the lowest interference
threshold level, or if we want to achieve additional gain on
the input for any reason. To adjust the input signal level,
turn the control knob counterclockwise until the mark
on the control knob points in the direction of the
desired boost level.
As a result of the dynamics control, the level of the
output signal of the device suffers a certain level
decrease, this is the case with most dynamics control
devices, this is a normal phenomenon. The output
signal level controller provides an opportunity to
compensate for this signal level loss. To compensate
for the output signal level, turn the output signal level
control clockwise until the mark on the control knob
points in the direction of the desired compensation
value.
In the case of the DICTATOR, unlike the most dynamics
controllers based on classical electron tube circuits, it
is possible to select two types of compression ratios.
In the LOCOMP position, we get the sound of a classic
tubular compressor such as the Farchild 670 and so
on. Generally, this mode is recommended for use on
a combiner and master bus, and for compressing
tracks wich contains fine details. In the HICOMP
position, we can hear a much higher rate of
! 5