Automation Networks ANC-120e Manuel de l'utilisateur - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Automation Networks ANC-120e. Automation Networks ANC-120e 18 pages. Compact usb to data highway plus adapter
Également pour Automation Networks ANC-120e : Manuel (4 pages)

Imprimer la page

ANC-120e

USB to DH+ Adapter

1. Select the desired settings on the main configuration page

2. Press the "Apply" button

3. The device will reboot automatically, and new settings will take effect

IMPORTANT: ANC-120e IP address/mask settings must match the Virtual Network adapter's IP

settings. If you change the ANC-120e or the adapter's IP settings, you also need to adjust its

communication partner.

Device Password

IMPORTANT: It is strongly recommended to change the default device password default value to

prevent unauthorized access and reconfiguration of the device.

To change the default web interface login password, please follow the steps below:

1. Type in the current password of the device into the "Current Password:" field. The default

password is set to "password" from the factory

2. Type in the desired new password into the "New Password:" field

3. Type in the same new password into the "Confirm Password:" field

4. Click on "Apply" button

5. The device will reboot automatically, and the new password will take effect

User Manual 12