Automation Networks ANC-120e Manuale d'uso - Pagina 12

Sfoglia online o scarica il pdf Manuale d'uso per Adattatore Automation Networks ANC-120e. Automation Networks ANC-120e 18. Compact usb to data highway plus adapter
Anche per Automation Networks ANC-120e: Manuale (4 pagine)

Automation Networks ANC-120e Manuale d'uso
ANC-120e
USB to DH+ Adapter
1. Select the desired settings on the main configuration page
2. Press the "Apply" button
3. The device will reboot automatically, and new settings will take effect
IMPORTANT: ANC-120e IP address/mask settings must match the Virtual Network adapter's IP
settings. If you change the ANC-120e or the adapter's IP settings, you also need to adjust its
communication partner.

Device Password

IMPORTANT: It is strongly recommended to change the default device password default value to
prevent unauthorized access and reconfiguration of the device.
To change the default web interface login password, please follow the steps below:
1. Type in the current password of the device into the "Current Password:" field. The default
password is set to "password" from the factory
2. Type in the desired new password into the "New Password:" field
3. Type in the same new password into the "Confirm Password:" field
4. Click on "Apply" button
5. The device will reboot automatically, and the new password will take effect
©Automation Network Inc. 2016
User Manual 12