Airdog X5 Manuel - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Airdog X5. Airdog X5 8 pages.
Également pour Airdog X5 : Manuel (18 pages), Manuel de l'utilisateur (8 pages)

Imprimer la page

Air Quality Sensor Cleaning

Airdog air puriﬁer has an embedded air quality

sensor. To keep the air quality sensor reading

correctly, please clean the sensor as illustrated

every 6 months, using dry or with rubbing alcohol

cotton swabs as illustrated.

Ionization Wire Frame Cleaning

1.We recommend you to clean the Ionization Wire Frame when the air puriﬁer

appears abnormal sounds, such as "popping or cracking" .

2.Use soft cloth or sponge to clean the Ionization Wire Frame track by sliding up-down gently.

3.Insert the Ionization Wire Frame in the direction of labeling.

Pic 1

Collecting Plates Cleaning

1. We recommend you to clean the collecting plates when the air puriﬁer display "

2. Cut the power, open the back shroud and pull out the collecting plates ( Pic 1 ) .

3. Put collecting plates into a container and use a cleaning brush to clean external sheet metal ﬁnishing by water ( Pic 3 ).

Remarks：a. It is better to use detergent and soak for around 10 mins before brushing the collecting plates.Do not soak for too long in

order to protect the normal functions of collecting plates ( Pic 2 ).

b. Choose the neutral detergent. DO NOT USE corrosive detergent, such as daily laundry powder.

c. Do ignore the small stains on the surface of the sheet metal as it will not seriously affect the use of the air puriﬁer.

4. Dry the collecting plates after cleaning, it can either use hair dryer or the nature sunlight ( recommend over 24 hrs ).

5. Put back the collecting plates in the direction of labeling.

Pic 1

Pic 2

Pic 3