Airdog X5 매뉴얼 - 페이지 5

{카테고리_이름} Airdog X5에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Airdog X5 8 페이지.
Airdog X5에 대해서도 마찬가지입니다: 매뉴얼 (18 페이지), 사용자 설명서 (8 페이지)

Air Quality Sensor Cleaning

Airdog air puriﬁer has an embedded air quality

sensor. To keep the air quality sensor reading

correctly, please clean the sensor as illustrated

every 6 months, using dry or with rubbing alcohol

cotton swabs as illustrated.

Ionization Wire Frame Cleaning

1.We recommend you to clean the Ionization Wire Frame when the air puriﬁer

appears abnormal sounds, such as "popping or cracking" .

2.Use soft cloth or sponge to clean the Ionization Wire Frame track by sliding up-down gently.

3.Insert the Ionization Wire Frame in the direction of labeling.

Pic 1

Collecting Plates Cleaning

1. We recommend you to clean the collecting plates when the air puriﬁer display "

2. Cut the power, open the back shroud and pull out the collecting plates ( Pic 1 ) .

3. Put collecting plates into a container and use a cleaning brush to clean external sheet metal ﬁnishing by water ( Pic 3 ).

Remarks：a. It is better to use detergent and soak for around 10 mins before brushing the collecting plates.Do not soak for too long in

order to protect the normal functions of collecting plates ( Pic 2 ).

b. Choose the neutral detergent. DO NOT USE corrosive detergent, such as daily laundry powder.

c. Do ignore the small stains on the surface of the sheet metal as it will not seriously affect the use of the air puriﬁer.

4. Dry the collecting plates after cleaning, it can either use hair dryer or the nature sunlight ( recommend over 24 hrs ).

5. Put back the collecting plates in the direction of labeling.

Pic 1

Pic 2

Pic 3