HIFEI Technology Fulcrum Pro 300A Manuel - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} HIFEI Technology Fulcrum Pro 300A. HIFEI Technology Fulcrum Pro 300A 12 pages. Brushless speed controller

Imprimer la page

Fulcrum Pro/Pro+ 300A Brushless Speed Controller Manuals

Ш C: ready to run !

—Set ESC's parameters. Do testing on test-bed and select appropriate parameters for the

configuration.

—Check battery's volts

—Use UBEC or separate receiver battery to power the receiver. Switch 'ON', the

green LED on ESC will light for a second and then extinguish. After the two power beeps,

it is time to go.

Note:

When the battery volts discharge and drop down to the set LVC value, the ESC will cutoff output

to motor in the way of set 'Hard' or 'Soft' cutoff type, which notice it's time to change battery pack.

When ESC cutoff output to motor, you can re-start the motor by moving throttle from 0 position

again. But ESC will cutoff again soon in 3 seconds.

Ш D: Wiring anti-spark cables

Fulcrum Pro 300A and Pro+ 300A ESC come with an anti-spark cables.

When run the ESC with 8s and more Lipo cells, please solder the anti-spark cable according to the

below instructions, which would reduce the sparks and prevent ESC from any damage.

www.hifei.com

Page 9

Fulcrum Pro/Pro+ 300A Brushless Speed Controller Manuals

Ⅳ Program the ESCs by Soft on PC

Fulcrum Pro/Pro+ 300A

ESC supports to be fully programmed the parameters by

'Swordfish Program soft' on PC and 'Hifei Program box'.

When program the ESC by soft, a 'USB Linker' is required to link the Swordfish ESC to PC.

'USB Linker' and 'Hifei Program box' are the parts sold separately. Here the instructions will guide

how to program the Swordfish 300A ESC controllers by soft on PC.

Please read the following instructions before programming.

ⅣA: Install Software on PC

A-a: Computer Operation System Requirements

A. Personal computer with Windows XP/ Vista/ Windows 7 operation system.

B. CD-ROM drive (or access to Internet)

C. Available USB port

D. 8 Megabytes hard disk space

E. Computer screen resolution with 800X600, 1024X768(recommended) , 1280X1024

A-b: Hardware

The hardware include Swordfish Pro/ Pro+ 300A ESC, USB Linker (sold separately), a set-up

CD (free to supply).

Swordfish 300A ESC

USB Linker

'Swordfish Program' Software to PC

www.hifei.com

ⅣA: Install

Set-up soft

Page 10