Celexon WHD30M-4K Manuel d'utilisation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Celexon WHD30M-4K. Celexon WHD30M-4K 12 pages. Celexon expert wireless hdmi set

Imprimer la page

RECEIVER BACK:

1. HDMI Out: Connect the receiver to your TV, monitor or projector via HDMI.

2. Power: Connect the receiver to the power supply using the supplied USB

cable and the USB power adapter. Alternatively, you can use any standard USB

power supply or a USB port from your display device, as long as it can supply

the receiver with 1A current.

3. Button: This button has various functions:

• Wake-up function: Press the button to start the transmitter if it was previ-

ously in standby mode („Link" LED is not lit).

• Reset to factory settings: You can reset the transmitter at any time by

pressing and holding the button for at least 10 seconds.

• Next connection function: Press briefly and the current connection to the

transmitter is interrupted, the receiver tries to establish a new connection

to the next possible transmitter.

Example: There are 2 or more sources in the room, each with a transmitter

connected and there is a display connected to a receiver. The user receives

audio/video data from the first transmitter (source) and would like to switch to

the content of a 2nd or 3rd source. For this purpose, the button on the receiver

must be pressed to switch to the next source.

A maximum of 10 transmitters in a network can be connected to one receiver in

connected individually one after the other

Note: If there is no other transmitter in the network, the button has no function

and the existing A/V connection is not interrupted