Celexon WHD30M-4K Руководство по эксплуатации - Страница 7
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Удлинитель Celexon WHD30M-4K. Celexon WHD30M-4K 12 страниц. Celexon expert wireless hdmi set
Печатать страницу
RECEIVER BACK:
1. HDMI Out: Connect the receiver to your TV, monitor or projector via HDMI.
2. Power: Connect the receiver to the power supply using the supplied USB
cable and the USB power adapter. Alternatively, you can use any standard USB
power supply or a USB port from your display device, as long as it can supply
the receiver with 1A current.
3. Button: This button has various functions:
• Wake-up function: Press the button to start the transmitter if it was previ-
ously in standby mode („Link" LED is not lit).
• Reset to factory settings: You can reset the transmitter at any time by
pressing and holding the button for at least 10 seconds.
• Next connection function: Press briefly and the current connection to the
transmitter is interrupted, the receiver tries to establish a new connection
to the next possible transmitter.
Example: There are 2 or more sources in the room, each with a transmitter
connected and there is a display connected to a receiver. The user receives
audio/video data from the first transmitter (source) and would like to switch to
the content of a 2nd or 3rd source. For this purpose, the button on the receiver
must be pressed to switch to the next source.
A maximum of 10 transmitters in a network can be connected to one receiver in
connected individually one after the other
Note: If there is no other transmitter in the network, the button has no function
and the existing A/V connection is not interrupted
6