8STREME 5200-J2X Manuel - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} 8STREME 5200-J2X. 8STREME 5200-J2X 16 pages. Robotic pool cleaner
Également pour 8STREME 5200-J2X : Manuel (16 pages)
EN
07 Cleaning the impeller
NOTE :
Some debris can clog or be
wrapped around the impeller of
the pump. By force, these debris
can hinder the proper
functioning of the robot or even
damage the engine.
Regular visual inspection is part
of the normal maintenance of the
robot.
7.1: Remove the flap assembly
to clean the dirt or hair on
impeller
7.2: Use a flat screw driver to ply
the flap assembly out as shown
7.3: Snap the flap assembly back
after cleaning
08 Cleaning the rollers
NOTE :
Greens rollers on the bottom of
the cleaners are installed with
bearing balls and must rotate
freely. Some debris can clog or be
wrapped around the rollers,
preventing the cleaner moving at
the right speed or not move at
all.
Regular inspection is part of the
normal maintenance for the
robot.
8.1: Manually rotate the green
rollers. They should turn easily.
If debris is blocking the
rotation, remove the debris
8.2: If the debris are not easy to
access, use a flat screw driver
to temporary remove the
rollers. Push tab as shown in
picture to remove.
8.3: After cleaning the roller, snap
it back in.
Page 10