- ページ 10

プール掃除機 8STREME 5200-J2XのPDF マニュアルをオンラインで閲覧またはダウンロードできます。8STREME 5200-J2X 16 ページ。 Robotic pool cleaner
8STREME 5200-J2X にも：マニュアル (16 ページ)

07 Cleaning the impeller

NOTE :

Some debris can clog or be

wrapped around the impeller of

the pump. By force, these debris

can hinder the proper

functioning of the robot or even

damage the engine.

Regular visual inspection is part

of the normal maintenance of the

robot.

7.1: Remove the flap assembly

to clean the dirt or hair on

impeller

7.2: Use a flat screw driver to ply

the flap assembly out as shown

7.3: Snap the flap assembly back

after cleaning

08 Cleaning the rollers

NOTE :

Greens rollers on the bottom of

the cleaners are installed with

bearing balls and must rotate

freely. Some debris can clog or be

wrapped around the rollers,

preventing the cleaner moving at

the right speed or not move at

all.

Regular inspection is part of the

normal maintenance for the

robot.

8.1: Manually rotate the green

rollers. They should turn easily.

If debris is blocking the

rotation, remove the debris

8.2: If the debris are not easy to

access, use a flat screw driver

to temporary remove the

rollers. Push tab as shown in

picture to remove.

8.3: After cleaning the roller, snap

it back in.

Page 10