DBI SALA Sayfline Multi-span Wire Rope Horizontal Lifeline Manuel d'instruction de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction de l'utilisateur pour {nom_de_la_catégorie} DBI SALA Sayfline Multi-span Wire Rope Horizontal Lifeline. DBI SALA Sayfline Multi-span Wire Rope Horizontal Lifeline 17 pages.

Imprimer la page

determine the span length and evaluate the required clearance. Figures 6 and 7 apply to one or two

users connected to the system.

Figure 7 - Self Retracting Lifeline Clearance Requirements

Step 2.

Determine the correct orientation of the intermediate brackets. Depending on the positioning of the

cable, the intermediate brackets may be installed in one of three orientations. See Figure 8 for the

bracket orientations.

Note: A maximum free fall distance of 6 ft. must be maintained in all bracket positions; a system with

brackets mounted below the user should only be used for fall restraint applications.

Overhead

Step 3.

To attach the cable to the first anchor point, link one pair of shackles together, then connect one side of

the linked shackles to the anchor using the included nut and bolt. Connect the other side of the

shackles to the Zorbit that's connected to the turnbuckle. See Figure 9. The horizontal lifeline system

may be secured directly to the anchorage if the anchorage incorporates a connecting element that

meets the requirements specified in section 2.4. The user must supply the anchorage hardware.

Tighten bolts and nuts used to connect the system to the anchorage connectors. Slide the Sayflink

Figure 8 - Bracket Orientations

To the side

At an angle

Below