- ページ 6
保護装置 DBI SALA Sayfline Multi-span Wire Rope Horizontal LifelineのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。DBI SALA Sayfline Multi-span Wire Rope Horizontal Lifeline 17 ページ。
ページを印刷するdetermine the span length and evaluate the required clearance. Figures 6 and 7 apply to one or two
users connected to the system.
Figure 7 - Self Retracting Lifeline Clearance Requirements
Step 2.
Determine the correct orientation of the intermediate brackets. Depending on the positioning of the
cable, the intermediate brackets may be installed in one of three orientations. See Figure 8 for the
bracket orientations.
Note: A maximum free fall distance of 6 ft. must be maintained in all bracket positions; a system with
brackets mounted below the user should only be used for fall restraint applications.
Overhead
Step 3.
To attach the cable to the first anchor point, link one pair of shackles together, then connect one side of
the linked shackles to the anchor using the included nut and bolt. Connect the other side of the
shackles to the Zorbit that's connected to the turnbuckle. See Figure 9. The horizontal lifeline system
may be secured directly to the anchorage if the anchorage incorporates a connecting element that
meets the requirements specified in section 2.4. The user must supply the anchorage hardware.
Tighten bolts and nuts used to connect the system to the anchorage connectors. Slide the Sayflink
Figure 8 - Bracket Orientations
To the side
6
At an angle
Below