Dynamix HP-20C Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Dynamix HP-20C. Dynamix HP-20C 6 pages. Homepna 2.0

1. Open the carton and make sure yourself the stuffs inside

are as same as the PACKAGE CONTENTS listed above.

Please contact your dealer for replacing in case any item is

missing or damaged.

2. Take out the HP-20C and power it on with the AC Adapter.

3. Take out the RJ-45/RJ-45 connecting line. Plug one end into

the "LAN1" port on the rear panel of the HP-20C and

connect the other end with your ISP access node, such as

the ADSL modem or the Cable modem.

4. Connect the other end of the RJ-11/RJ-11 line from the in-

line telephone splitter or the splitter port of the ADSL

modem with the "PHONE" port on the rear panel of the

HP-20C. (In Cable modem's cases, you may leave the

"PHONE" port free from any other connection or just

connect it with a telephone extension. For those cases

without splitter, the connection will be as same as Cable

modem's.)

5. Take out the last RJ-11/RJ-11 line and simply plug one end

into the RJ-11 phone jack in the wall at your home and

connect the other end with the "HPNA" port on the rear

panel of the HP-20C. The high-speed broadband home

network is then successfully established.

6. For the "LAN2" port on the rear panel of the HP-20C, you

may connect it with the Ethernet port of your PC, Set-Top-

Box, or Switch/Hub.

7. To connect with your home network in the other rooms, just

simply plug one end of the RJ-11/RJ-11 line into the phone

jack in that room and link the other end with your PC

through another HP-20C.