Agriweld Swath Roller Manuel de l'opérateur - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel de l'opérateur pour {nom_de_la_catégorie} Agriweld Swath Roller. Agriweld Swath Roller 17 pages.
When replacing roller Bearings, drop roller down on
linkage so the weight of the roller is just sat on the
ground and place chock in front of roller to prevent
rolling after the fasteners have been removed.
Remove M16 x 55 Bolts and M16 Nylock Nuts and
lift frame off the roller allowing you to remove the
bearings off the roller shaft. Follow steps in reverse
when fitting roller back into frame. Ensure all
fasteners are tight before transporting or using the
swath roller.
Replacing Roller Bearings
M16 Nylock
UCFX06 30mm
Shaft 4 Hole
Flange Bearing
12
M16 x 55mm
Bolt
M16 Washer