Agriweld Swath Roller Operatör El Kitabı - Sayfa 12

Traktör Aksesuarları Agriweld Swath Roller için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. Agriweld Swath Roller 17 sayfaları.

When replacing roller Bearings, drop roller down on

linkage so the weight of the roller is just sat on the

ground and place chock in front of roller to prevent

rolling after the fasteners have been removed.

Remove M16 x 55 Bolts and M16 Nylock Nuts and

lift frame off the roller allowing you to remove the

bearings off the roller shaft. Follow steps in reverse

when fitting roller back into frame. Ensure all

fasteners are tight before transporting or using the

swath roller.

Replacing Roller Bearings

M16 Nylock

UCFX06 30mm

Shaft 4 Hole

Flange Bearing

M16 x 55mm

Bolt

M16 Washer