909 305DB Manuel d'instruction - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} 909 305DB. 909 305DB 20 pages. 2000w 255mm (10") single bevel laser guided slide mitre saw

Introduction
Your new 909 power tool will more than satisfy
your expectations. It has been manufactured under
stringent 909 Quality Standards to meet superior
performance criteria.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years
of dependable service.
CAUTION.
Carefully read through this entire Instruction
Manual before using your new 909 Power Tool. Take
special care to heed the Cautions and Warnings.
Your 909 power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.

Environmental protection

Recycle unwanted materials instead
of disposing of them as waste. All tools,
hoses and packaging should be sorted,
taken to the local recycling centre and
disposed of in an environmentally safe way.
WARNINGS
It may be more difficult to see the laser line in conditions of
bright sunshine and on certain surfaces.

Description of symbols

The rating plate on your tool may show symbols.
These represent important information about the
product or instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Double insulated for additional protection.
Conforms to relevant standards
for electromagnetic compatibility.
For safe operation read instruction manual.

Specifications

Input power:
2000W
No load speed:
5500 RPM
Voltage:
230–240Vac ~ 50 Hz
Blade size:
Ø 255 mm (10") x Ø 16 mm (5/8") bore
Number of teeth: 40
Mitre table angles: 0° to 52° left & right
Bevel cuts:
0° to 45° left
Straight cut
0° x 0°:
81.5 mm (3 1/4") x 295 mm (11 5/8")
Mitre cut
45° (L&R) x 0°:
81.5 mm (3 1/4") x 205 mm (8 1/16")
Bevel cut
0° x 45°(L):
43 mm (1 5/8") x 295 mm (11 5/8")
Compound mitre cut
45°(L) x 45°(L):
43 mm (1 5/8") x 205 mm (8 1/16")
Weight:
13.5 kg (29.7 lbs)
3