909 DP250LS Manuel d'instruction - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} 909 DP250LS. 909 DP250LS 16 pages. 1/3 hp 5 speed drill press with laser

Imprimer la page

3) Personal safety

a) Stay alert, watch what you are doing and use

common sense when operating a power tool. Do not

use a power tool while you are tired or under the

influence of drugs, alcohol or medication.

of inattention while operating power tools may result in

serious personal injury.

b) Use personal protective equipment. Always wear eye

protection.

Protective equipment such as dust mask,

non-skid safety shoes, hard hat, or hearing protection used

for appropriate conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the switch

is in the off-position before connecting to power

source and/or battery pack, picking up or carrying

the tool.

Carrying power tools with your finger on the

switch or energising power tools that have the switch

on invites accidents.

d) Remove any adjusting key or wrench before

turning the power tool on.

attached to a rotating part of the power tool may result

in personal injury.

e) Do not overreach. Keep proper footing and balance

at all times.

This enables better control of the power tool

in unexpected situations.

f ) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves away

from moving parts.

Loose clothes, jewellery or long hair

can be caught in moving parts.

g) If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used.

can reduce dust-related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the correct power

tool for your application.

do the job better and safer at the rate for which it was

designed.

A moment

A wrench or a key left

Use of dust collection

The correct power tool will

b) Do not use the power tool if the switch does not turn

it on and off.

Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or

the battery pack from the power tool before making

any adjustments, changing accessories, or storing

power tools.

Such preventive safety measures reduce

the risk of starting the power tool accidentally.

d) Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tool's

operation. If damaged, have the power tool repaired

before use.

Many accidents are caused by poorly

maintained power tools.

f ) Keep cutting tools sharp and clean.

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to be

performed.

Use of the power tool for operations different

from those intended could result in a hazardous situation.

h) This appliance is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge,

unless they have been given supervision or

instruction concerning use of the appliance by a person

responsible for their safety.

i) Children should be supervised to ensure that they do

not play with the appliance.

5) Service

a) Have your power tool serviced by a qualified repair

person using only identical replacement parts.

will ensure that the safety of the power tool is maintained.

Properly

This