909 DP250LS Manuel d'instruction - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} 909 DP250LS. 909 DP250LS 16 pages. 1/3 hp 5 speed drill press with laser

Imprimer la page

Unpacking

Due to modern mass production techniques, it is unlikely

that your 909 Power Tool is faulty or that a part is missing.

If you find anything wrong, do not operate the tool until the

parts have been replaced or the fault has been rectified.

Failure to do so could result in serious personal injury.

Required tools

The following tools are required to assemble the drill press:

•

3mm, 4mm Hex Keys (Supplied)

•

Wrench (Not Supplied)

•

Phillips Head Screwdriver (Not Supplied)

Assembly time

The DP250LS drill press will take approximately

10-15 minutes to assemble.

Components

The DP250LS drill press is supplied with

the following components:

1. Motor Head

2. Base

3. Column

4. Table

5. Table Lock (fitted)

6. Belt (fitted)

7. Handle Rods (x3)

8. Keyed Chuck

9. Chuck Key

10. Hex Keys (x2)

11. Bolts for attaching column to base (x3)

12. Instruction manual