909 DP250LS Instruction Manual - Page 8

Browse online or download pdf Instruction Manual for Drill 909 DP250LS. 909 DP250LS 16 pages. 1/3 hp 5 speed drill press with laser

Unpacking

Due to modern mass production techniques, it is unlikely
that your 909 Power Tool is faulty or that a part is missing.
If you find anything wrong, do not operate the tool until the
parts have been replaced or the fault has been rectified.
Failure to do so could result in serious personal injury.

Required tools

The following tools are required to assemble the drill press:
3mm, 4mm Hex Keys (Supplied)
Wrench (Not Supplied)
Phillips Head Screwdriver (Not Supplied)

Assembly time

The DP250LS drill press will take approximately
10-15 minutes to assemble.

Components

The DP250LS drill press is supplied with
the following components:
1. Motor Head
2. Base
3. Column
4. Table
5. Table Lock (fitted)
6. Belt (fitted)
7. Handle Rods (x3)
8. Keyed Chuck
9. Chuck Key
10. Hex Keys (x2)
11. Bolts for attaching column to base (x3)
12. Instruction manual
7
10
1
2
5
4
8
11
8
3
6
9
12