dbx DriveRack PA+ Manuel de démarrage rapide - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} dbx DriveRack PA+. dbx DriveRack PA+ 16 pages. 2-way setup
Imprimer la page
13.
High Amp Level
Adjust knob
same as your amp
˘56%
13A - Set your amp input gain so it matches the dial shown
in the LCD display. You may also turn the Data Wheel to
change the display to match your amp dial setting if desired.
NOTE: If you are using self-powered speakers, make sure that
the speaker Mic/Line switch is set to Line.
14.
Low Amplifier
Select an amplifier
˘Crown Xti 4000
14A - Turn the Data Wheel to select your Low speaker
amplifier manufacturer and model. For this example we have
selected the Crown XTi 4000.
15.
Low Amp Level
Adjust knob
same as your amp
˘53%
15A - Set your amp input gain so it matches the dial shown
in the LCD display. You may also turn the Data Wheel to
change the display to match your amp dial setting if desired.
NOTE: If you are using self-powered speakers, make sure that
the speaker Mic/Line switch is set to Line.
16.
Low Amp Bridging
Select
Same as your amp
˘Normal
16A - Turn the Data Wheel to select Normal or Bridged to
match your amp setting (Normal typical).
Crown Xti
13B - Press the NEXT PG button.
14B - Press the NEXT PG button.
15B - Press the NEXT PG button.
16B - Press the NEXT PG button.