- ページ 6

アンプ dbx DriveRack PA+のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。dbx DriveRack PA+ 16 ページ。 2-way setup

13.

High Amp Level

Adjust knob

same as your amp

˘56%

13A - Set your amp input gain so it matches the dial shown

in the LCD display. You may also turn the Data Wheel to

change the display to match your amp dial setting if desired.

NOTE: If you are using self-powered speakers, make sure that

the speaker Mic/Line switch is set to Line.

14.

Low Amplifier

Select an amplifier

˘Crown Xti 4000

14A - Turn the Data Wheel to select your Low speaker

amplifier manufacturer and model. For this example we have

selected the Crown XTi 4000.

15.

Low Amp Level

Adjust knob

same as your amp

˘53%

15A - Set your amp input gain so it matches the dial shown

in the LCD display. You may also turn the Data Wheel to

change the display to match your amp dial setting if desired.

NOTE: If you are using self-powered speakers, make sure that

the speaker Mic/Line switch is set to Line.

16.

Low Amp Bridging

Select

Same as your amp

˘Normal

16A - Turn the Data Wheel to select Normal or Bridged to

match your amp setting (Normal typical).

Crown Xti

13B - Press the NEXT PG button.

14B - Press the NEXT PG button.

15B - Press the NEXT PG button.

16B - Press the NEXT PG button.