Hifonics zeus series Manuel de démarrage rapide - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Hifonics zeus series. Hifonics zeus series 8 pages. Zeus series
Également pour Hifonics zeus series : Manuel du propriétaire (4 pages), Manuel de l'utilisateur (8 pages), Manuel (12 pages), Manuel de l'utilisateur (13 pages)
Imprimer la page
INSTALLATION NOTES
The first step of installing a speaker system is thorough planning. Choose a suitable location for your speak-
er components carefully. Follow these suggestions to ensure proper imaging and maximum performance:
1. Choose a location that offers the least amount of obstruction between the components and your ears.
Pay also attention to the position of the seats, headrests and other constructional systems in the interior
space of the car.
2. Try to mount the speakers on the same arrangement. They should be installed at the same height and
directly across from each other. Do not mount one speaker higher, lower, further forward or further back-
ward from the opposite speaker.
3. The tweeter should always be installed as close as possible to the midbass speaker.
4. Always take a look behind the chosen mounting locations to ensure that there is proper clearance for
the rear of the speakers and avoid obstructions such as window tracks, wire harnesses, gas tank etc.
5. Maximum performance is achieved when the speaker is securely mounted to a door panel or rear speak-
er deck. There should be no gaps between the speaker basket and the mounting surface
6. Please handle the components with care, otherwise they will get damaged.
7. Please pay attention to the correct polarity (+ or -) for all terminals and connections.
8. Never connect the speakers to the electrical ground or with the body of the vehicle.
SETTINGS CROSSOVER ZXO2
If you want to change the factory settings (2-way operation, 0dB tweeter level), firstly remove the acrylic
glass cover of the crossover. Beneath you find three connector strips:
TWEETER LEVEL
Insert the jumper to the desired
position, choose between:
+ 3 dB
0 dB
- 9 dB
+ 3 dB
light increase
0 dB
no attenuation
– 3 dB
light attenuation
2-WAY-OPERATION
The jumpers TWEETER and
WOOFER must be on position
„2-WAY".
TWEETER
WOOFER
2-WAY
2-WAY
3-WAY
3-WAY
ENGLISH
3-WAY-OPERATION
The jumpers TWEETER and
WOOFER must be on position
„3-WAY".
TWEETER
WOOFER
2-WAY
2-WAY
3-WAY
3-WAY
NOTE: The connected midrange
driver at „OUT" must be operated
with a separate crossover to pro-
tect him for too low frequencies.
5