Autonics CT Series Manuel - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Autonics CT Series. Autonics CT Series 13 pages. Programmable digital counters / timers
Également pour Autonics CT Series : Manuel (4 pages), Manuel du produit (11 pages)

Imprimer la page

7. Counting function mode setting

Setting mode

counting speed

Input mode

When output mode is S , T ,D , the input mode only can be Ud-A , B , C.

Maximum

Output mode

OUT2 output

time

OUT1 output

time

Unit: ms

Input logic

Min.reset time

Decimal point

Prescale value

Memory

retention

Lock key

Counter/Timer

Page 05

Selection and setting

Counting speed means the allowable maximum

inpu frequency of INA and INB . Eg: If set CPS

as 5K , when input frequency signal is larger

than 5K , the counting will be not correct.

Up or Down inut mode

Up/Down- A, B, C inut mode

Use

to select PnP or nPn

▲

Min. external RESET signal width

- - - - - - → - - - - - - →- - - - - - → - - - - - -

Shift the flickering digit

Change the prescale value

Set range of prescale value

6 Digit: 0.001 ~ 99.999

prescale value: It is actual length or other measure unit per one pulse

(

、▲)

Unit: ms

: Power reset for counting value.

(Reset counting value when power off)

: Memorize counting value

(Memorize counting value when power off)

: Counter

: Timer

KKCTE02T-A/0-20131221