Autonics LE4S Series Manuel - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Autonics LE4S Series. Autonics LE4S Series 17 pages. Lcd digital timers
Également pour Autonics LE4S Series : Instruction (18 pages), Manuel (6 pages)

Imprimer la page

LE4S Series

● Backlight ON/OFF setting

[Figure6]

※ Factory default

● Key Lock setting

[Figure7]

※ Factory default

Setting Time Change

Please set operation time according to following instruction as the setting is different depending on the output operation

mode.

● Output operation mode: OND, OND Ⅰ , OND Ⅱ , INT, INT Ⅰ , OFF D

(LE4SA does not have no OND Ⅰ , INT Ⅰ , OFF D.)

[Figure1]

1) Press

in RUN mode, time set digits will flash. [Figure 1]

2) Change setting time by using

: Shift the setting digits.

: Shift the flashing position value. As press

number will increase faster by press

3) When the setting is completed, it will be stored and return to RUN mode by pressing

N-32

1) In function setting mode, if it enters into Backlight ON/OFF setting mode, the characters

will be displayed as shown in the [Figure 6].

2) Select Backlight ON or OFF using

3) Press

to complete Backlight ON/OFF setting and move to the next mode.

4) If pressing

for 3 sec in any function setting mode, it will return to Run mode.

1) In function setting mode, if it enters into Key Lock setting mode, the characters will be

displayed as shown in the [Figure 7].

2) Select

lOFF

LOc1

LOc2

Blank

Turns off

the Lock mode.

3) Press

to complete key lock setting and move to the next mode.

4) If pressing

for 3 sec in any function setting mode, it will return to Run mode.

※ Factory default for LE4S is

※ Key Lock function

Display

Function

Turns off the key Lock mode.

lOFF

LOc1

LOc2

LOc3

[Figure2]

. [Figure 2,3,4]

once, it will increase by 1digit,

for over 2 sec

using

LOc3

cannot be used.

and Factory default for LE4SA is

lOFF

cannot be used.

[Figure3]

cannot be used.

LOc1

[Figure4]

[Figure5]

[Figure 5]