iHealth BP7 Manuel du propriétaire - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} iHealth BP7. iHealth BP7 16 pages. Wrist
Également pour iHealth BP7 : Manuel du propriétaire (16 pages), Manuel de démarrage rapide (4 pages)
Imprimer la page
a. Be seated with your feet flat on the floor without crossing your legs.
b. Place your hand palm-side up in front of you on a flat surface such as a desk or table.
c. The middle of the cuff should be at the level of the right atrium of your heart.
Note: Blood pressure can be affected by the position of the cuff and your
physiologic condition.
During measurement, press the "START/STOP" button for 2 seconds to turn off the monitor
manually.
Monitor Status
Waiting to connect
Measuring
Measurement completed
Operation Instructions With iOS Device
Before measurement begins, adjust the height of your wrist until it is level with the right atrium of
your heart. The App will detect your wrist position and the measurement will begin automatically
when the correct position is detected,. If not positioned correctly, the measurement will not start.
Do not move and maintain a steady position until the measurement is completed.
During measurement, press the "START/STOP" button to stop measurement, Press the
START/STOP" button for 2 seconds to turn off the monitor manually.
For detailed operating instructions, please visit http://www.ihealthlabs.com.
Note: Please consult a healthcare professional for interpretation of blood pressure measurements.
Measuring without an iOS Device
Offline measurement is enabled automatically at your first online measurement. To start offline
measurement when disconnected from the iOS device, turn on the monitor by pressing the
START/STOP button. The status indicator light will be green and the monitor will begin
measurement. If measured successfully, the measurement will be stored in the iHealth Wireless
Blood Pressure Wrist Monitor and the status indicator light will flash green. The reading is not
visible until the next iOS connection. The measurement will be uploaded to the device
automatically upon the next iOS connection. Otherwise the status indicator will be red for a
moment then change to flashing green. The monitor will turn off automatically after 2 minutes of
non-operation. Alternatively, you can keep on pressing the "START/STOP" button for 2 seconds to
turn off the monitor manually.
During measurement, press the "START/STOP" button to stop the measurement process.
Important: Please consult a healthcare professional for interpretation of blood pressure
measurements
Bluetooth Indicator
Flashing blue light
Steady blue light
Gradually extinguishing light
5