9dot LiteSync Manuel - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} 9dot LiteSync. 9dot LiteSync 17 pages.
Imprimer la page
Blocks diagram
The electronic design shows the presence of two main structures:
(•) a CPU guarantees the correct operation of all the basic electronics and performs the voltage and current
measurement
(•) the power components. The isolated converter is powered via one or both pairs of input terminals
The following is a schematic detail of the LiteSync design structure.
The power inputs, connectable through two redundant connectors, they have the negative pole interconnected and no
conversion is made to the applied voltage, so it will be the same voltage that comes out of the PoE port.
In this way it is possible to connect several voltages simultaneously, for example:
Input power 1
Input power 2
LITESYNC MANUAL
ISOLATED DCDC
converter
CPU
CPU
HW
SYNC
GPS
LEDs
SYNC IN
Figure 6 - Blocks diagram of the LiteSync electronic design
48V
24V
MAIN INPUT POWER
REVERSE POLARITY
PROTECTION
VOLTAGE & LOAD
MEASUREMENT
ON/OFF
PROTECTION
GENERATION OF
SYNCHRONY
IMPULSES
KEY DETECTION
OUTPUT
PORTS
11
VER. 2 REV. 0