9dot LiteSync Manuel - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} 9dot LiteSync. 9dot LiteSync 17 pages.
Imprimer la page
9
Installation
The LiteSync is designed for installation in a 19 "rack cabinet, however the fixing flaps can be rotated 90 ° for wall mounting.
Included are mounting tabs, one short and one long to complete the half rack unit.
IMPORTANT NOTE: Use only the fixing screws supplied with the device for fixing the fins; the use of different fixing screws
can cause irreparable damage to the device.
Figure 3 - LiteSync with fixing tabs at 90°
To the correct operation of the surge arresters, is essential to ground the rack cabinet and connect the grounding terminal on
the back.
Figure 4 - long mounting flap to complete the half rack unit
This makes it possible to mount two LiteSync on one rack unit.
Figure 5 - two LiteSync on one rack unit
LITESYNC MANUAL
VER. 2 REV. 0