Dynaset 90 Manuel d'installation - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Dynaset 90. Dynaset 90 16 pages. Hydraulic variable displacement pump

Imprimer la page

HYDRAULIC VARIABLE DISPLACEMENT PUMP

INSTALLATION GUIDE

5.1.

ADJUSTING LS-PRESSURE

If your system requires LS-pressure adjusting, adjust the differential LS pressure by the

regulator incorporated in the hydraulic pump. The regulators place may vary between

pump models.

1 = LS-pressure regulator

1. Install pressure gauges to the pressure line (P) from the pump and to the LS-line.

Calculate the LS-pressure from the pressure differentation between the gauges.

Example:

LS-line gauge = 210bar, Pressure line gauge = 230bar

LS-Pressure = 230-210 = 20 bar

2. Start the engine of your base machine and set it up to the required RPM level needed

for yout hydraulic system to operate. Start the hydraulic system.

Dynaset Oy | Menotie 3, FI-33470 Ylöjärvi, Finland | tel: +358 3 3488 200 | [email protected] | www.dynaset.com