Dynaset 90 Посібник з монтажу - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник з монтажу для Водяний насос Dynaset 90. Dynaset 90 16 сторінок. Hydraulic variable displacement pump
Друкувати сторінкуHYDRAULIC VARIABLE DISPLACEMENT PUMP
INSTALLATION GUIDE
5.1.
ADJUSTING LS-PRESSURE
If your system requires LS-pressure adjusting, adjust the differential LS pressure by the
regulator incorporated in the hydraulic pump. The regulators place may vary between
pump models.
1 = LS-pressure regulator
1. Install pressure gauges to the pressure line (P) from the pump and to the LS-line.
Calculate the LS-pressure from the pressure differentation between the gauges.
Example:
LS-line gauge = 210bar, Pressure line gauge = 230bar
LS-Pressure = 230-210 = 20 bar
2. Start the engine of your base machine and set it up to the required RPM level needed
for yout hydraulic system to operate. Start the hydraulic system.
10
Dynaset Oy | Menotie 3, FI-33470 Ylöjärvi, Finland | tel: +358 3 3488 200 | [email protected] | www.dynaset.com