DCD 61400-000 Manuel d'utilisation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} DCD 61400-000. DCD 61400-000 14 pages. Lineman lasher

2. Threading the Lashing Wire

You have loaded the lashing wire, now you are ready to thread the lashing wire.
Note that when facing the direction the Lasher will travel, the LHS is on your left and
the RHS is on your right.
2a) To thread lashing wire take 'free' end of lashing wire as it comes off the wire
spool, thread 'tree' end under the long roller. NOTE: Both wire spools must be
loaded and threaded to rotate in the same (counterclockwise) direction.
2b) Extend up along the outside of the friction wheel and around friction wheel
one time as per arrows. Bring wire off friction wheel and around front wire
guide roller then back to rear guide roller. Wire passes under rear guide roller.
NOTE: it is recommended that both sides be loaded with wire to help balance
the lasher, whether you are single or double lashing.
Page | 5