DCD 61400-000 사용 설명서 - 페이지 6

{카테고리_이름} DCD 61400-000에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DCD 61400-000 14 페이지. Lineman lasher

2. Threading the Lashing Wire

You have loaded the lashing wire, now you are ready to thread the lashing wire.

Note that when facing the direction the Lasher will travel, the LHS is on your left and

the RHS is on your right.

2a) To thread lashing wire take 'free' end of lashing wire as it comes off the wire

spool, thread 'tree' end under the long roller. NOTE: Both wire spools must be

loaded and threaded to rotate in the same (counterclockwise) direction.

2b) Extend up along the outside of the friction wheel and around friction wheel

one time as per arrows. Bring wire off friction wheel and around front wire

guide roller then back to rear guide roller. Wire passes under rear guide roller.

NOTE: it is recommended that both sides be loaded with wire to help balance

the lasher, whether you are single or double lashing.

Page | 5