Gale 30 Series Manuel du propriétaire - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Gale 30 Series. Gale 30 Series 16 pages.
Imprimer la pageCongratulations on purchasing these Gale loudspeakers. To ensure
optimum performance please read the following information, then sit
back, relax and enjoy!
Connections
Switch off your amplifier whenever making connections. Connect the
positive terminal on the amplifier left channel, marked + or coloured
red, to the positive terminal on the left loudspeaker. The negative
terminal on the amplifier left channel, marked - or coloured black,
must be connected to the negative terminal on the left loudspeaker.
Repeat connections for the right channel.
Listening
Switch on the amplifier with the volume turned down low. Check that
the bass and treble sounds come from both speakers. If not, switch off
and remake the connections.
Amplifier Matching
High peak power handling of Gale loudspeakers allows responsible use
with more powerful amplifiers. Avoid over driving any amplifier. Never
make or break connections to an amplifier when the volume is turned
up.
Stands
Small loudspeakers should not be used on the floor but can (if
necessary) be placed on shelves or tables. Locating your speakers on
rigid stands or, in the case of floorstanders, with floor spikes is
essential to get a detailed sound with 'fast' bass and accurate stereo
imaging.
AP12309/1 Gale 30 Series Owners' Manual (page 3)
Print Pantone Cool Grey 9C
English - Quick Set-up
Positioning
You should be able to see all your front speakers from your listening
position. Your listening position should be slightly further from each
speaker than they are apart. Symmetrical positioning and angling the
cabinets in towards the listening position will help firm up stereo
imaging. Try adjusting the loudspeaker positions and angles to obtain
the most satisfying sound and most convincing stereo image.
Remember there is no right or wrong - if it sounds good then it is good!
Running-In
Your new loudspeaker system will require a total of approximately 10
hours of normal use to allow the components to settle into their
working routine and reach their optimum performance.
Remember
Always lower the volume before making any adjustments to the
system.
Always switch off the amplifier before checking or making any changes
to any connections in the system.
Never try to find out how loud your system will go.
Never use your loudspeakers for any purpose other than domestic
listening.
For full installation instructions turn to page 8
3