Autopage RF-505 Manuel d'utilisation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Autopage RF-505. Autopage RF-505 12 pages. Part 1
Également pour Autopage RF-505 : Programmation de l'émetteur (1 pages)

Imprimer la page

To Exit the SIS-5P adjustment mode, press the "M" & "Lock/Unlock"

buttons together. The siren or horn will sound 4 chirps confirming exit.

The sensor adjust mode will automatically exit in 30 seconds if no signal is

received.

Transmitter Button

REMOTE TRANSMITTER PROGRAMMING

Programming Transmitter

The RF-505 can program up to 4 transmitters in memory. To enter

programming, follow these steps:

1. Turn the Ignition to the ON position.

2. Within 15 seconds push the valet switch 3 times the siren and/or horn

will sound 1 long chirp.

3. Press the "Lock/Unlock" button on the transmitter #1; there will be 1

short chirp. Repeat for transmitter #2, there will be 2 short chirps.

NOTE: If you are programming transmitters #3 & #4, repeat step 3

for both transmitters.

4. Turn the ignition OFF, there will be 3 long chirps to confirm exit of

transmitter programming mode.

Actions

Press & Hold 5 sec.

Press 1 Time

—

System Function

SIS - 5P Sensor Adjustment Mode

Increase Sensor Sensitivity

Decrease Sensor Sensitivity

Exit Sensor Adjustment Mode