Autopage RF-505 운영 매뉴얼 - 페이지 7

{카테고리_이름} Autopage RF-505에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Autopage RF-505 12 페이지. Part 1
Autopage RF-505에 대해서도 마찬가지입니다: 송신기 프로그래밍 (1 페이지)

To Exit the SIS-5P adjustment mode, press the "M" & "Lock/Unlock"
buttons together. The siren or horn will sound 4 chirps confirming exit.
The sensor adjust mode will automatically exit in 30 seconds if no signal is
received.
Transmitter Button
+
+

REMOTE TRANSMITTER PROGRAMMING

Programming Transmitter
The RF-505 can program up to 4 transmitters in memory. To enter
programming, follow these steps:
1. Turn the Ignition to the ON position.
2. Within 15 seconds push the valet switch 3 times the siren and/or horn
will sound 1 long chirp.
3. Press the "Lock/Unlock" button on the transmitter #1; there will be 1
short chirp. Repeat for transmitter #2, there will be 2 short chirps.
NOTE: If you are programming transmitters #3 & #4, repeat step 3
for both transmitters.
4. Turn the ignition OFF, there will be 3 long chirps to confirm exit of
transmitter programming mode.
Actions
Press & Hold 5 sec.
Press 1 Time
Press 1 Time
Press 1 Time
7
System Function
SIS - 5P Sensor Adjustment Mode
Increase Sensor Sensitivity
Decrease Sensor Sensitivity
Exit Sensor Adjustment Mode