Autopage RF-505 운영 매뉴얼 - 페이지 6

{카테고리_이름} Autopage RF-505에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Autopage RF-505 12 페이지. Part 1
Autopage RF-505에 대해서도 마찬가지입니다: 송신기 프로그래밍 (1 페이지)

PASSIVE ARMING OPERATION—

The RF-505 provides a choice of arming capabilities. The alarm can be set

to automatically arm, or be manually armed. This selection can be done

using the remote transmitter. Follow these steps to turn ON or OFF passive

(automatic) arming and manual arming:

Press the "M" and "Car" buttons together for 5 seconds. The siren will chirp

3 times. Press the "Lock/Unlock" button, the siren will chirp 4 times to and

exit the program mode. To change back to Manual arming, press the "M"

and "Car" buttons together for 5 seconds. The siren will chirp 3 times. Press

the "Car" button, the siren will chirp 4 times and exit the program mode.

Transmitter Button

SHOCK SENSOR ADJUSTMENT FROM REMOTE TRANSMITTER

ADJUSTING THE SIS-5P SHOCK SENSOR

There are 15 sensor adjustment settings. To adjust the SIS-5P press the "M"

& "Lock/Unlock" buttons together for 5 seconds. The siren or horn will

respond with 3

chirps.

sensitivity and pressing the "Car" button will decrease the sensitivity. You

will hear a chirp from the siren after each setting adjustment and a double

chirp from the siren when you have reached setting No.1 or setting No.15.

While setting the sensitivity for the SIS-5P, you can test the shock sensor for

proper adjustment by applying impact to the vehicle during the adjustment

mode.

Actions

Press & Hold 3 sec.

Press 1 Time

Pressing the "Lock/Unlock" button will increase the

System Function

Passive / Manual Mode

Passive ON

Passive OFF