Dynatech IN-3000 Manuel d'utilisation et d'entretien - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Dynatech IN-3000. Dynatech IN-3000 9 pages. Instantaneous safety gear

Imprimer la page

INSTRUCTIONS: IN-3000

Date: 20/10/2020

Revision: 06

3.2 SAFETY GEAR ADJUSTMENT

⚠

In order to avoid problems with the installation's normal operation, it is very important that the person

carrying out the installation rigorously observes the distances mentioned in this item.

3.2.1

IN-3000 MODEL FOR 8mm and 9mm THICKNESS GUIDE RAILS

The guide rail's position in the block should be adjusted as follows. (see drawing DYN 26.C02.00).

Figure 5: Safety gear adjustment in relation to the guide rail (IN-3000)

3.2.2

IN-3000 MODEL FOR 10mm THICKNESS GUIDE RAILS

The guide rail's position in the block should be adjusted as follows. (see drawing DYN 26/3.C02.00)

Figure 6: Safety gear adjustment in relation to the guide rail (IN-3000 G10)

3.3 COUPLING THE DRIVING BAR

It is the responsibility of the person who installs the safety gear to properly position the driving bar in relation

to the safety gear, as well as to properly synchronise the safety gears controlled by that driving bar. The correct

position is when the safety gear roller is on the bottom of the block.

Note: This manual displays partial information on the instructions for use and maintenance of this product. Please refer to the

customer area in Dynatech's website in order to consult the full manual; http://customers.dynatech-elevation.com/

Cod: DYN 26.06

Figure 4: Improper assembly