Gallagher T20 Note d'installation - Page 6
Parcourez en ligne ou téléchargez le pdf Note d'installation pour {nom_de_la_catégorie} Gallagher T20. Gallagher T20 14 pages.
Imprimer la page
Gallagher T20 Reader
9.
Removal of the facia assembly is a simple reversal of these steps.
Note: If it is difficult to remove the facia from the base, a tab can be fashioned
using a piece of gaffer tape. Stick the tab to the facia (over the Gallagher logo)
and use it to pull the facia out of the base, then remove the tape without
leaving a mark.
Connections
The Gallagher T20 Reader can be connected as a Cardax IV Reader to one of the
following devices:
•
Gallagher Reader Module 8R or 4R (attached to the Controller 6000)
•
Gallagher GBUS Universal Reader Interface (Gallagher GBUS URI)
•
Gallagher Controller 3000-8R or 3000-4R
•
Gallagher Local Bus Universal Reader Interface (Gallagher URI)
•
Gallagher Local Bus Reader I/O Interface
Page 6
Facia
Building cable
Reader tail
Connection
Fit T10 Torx Post screw to
secure facia to base
Installation Note
Base
Document Code: 3E3140
Edition 3, April 2013