DCS Rossini Manuel de l'utilisateur - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DCS Rossini. DCS Rossini 17 pages. Digital audio master clock
Imprimer la pagedCS Rossini Clock User Manual
Power Link
Connecting the Player or DAC's RS232 port to the Rossini
RS232 Loop
Clock's
port allows both units to be set to sleep /
wake / off by pressing the Player or DAC's
by one remote control command.
Both units must be in the same RS232 mode (Binary or Text).
As the Clock boots up in Binary mode, set the Player or DAC's
Unit Settings > RS232
A screened cable fitted with two 9-way female D-type
connectors wired pin-to-pin is required.
RS232 Control
The Clock's settings can be changed using a control system or a computer running a terminal
emulator program. The procedure using a Windows PC with TeraTerm is described here, but other
programs such as PuTTY or ZTerm can be used. If you have difficulty with this, please ask your
Dealer for help.
• Hold down the Clock's
mode.
• Power up a Windows PC.
• If
necessary,
download
http://en.sourceforge.jp/projects/ttssh2/releases/
and install it on your PC. (If the link is broken,
please search for Tera Term online.)
• Use a USB-to-RS232 adapter cable to connect the
RS232 IN
Clock's
ports.
• Run ttermpro.exe.
• Click
the Serial
automatically select the port connected to the
Clock. Click OK.
• Click Setup > Serial Port, set the panel as shown
with the Baud rate set to 115200 and click OK.
• Commands are in UPPERCASE only, type HELP to list the available commands.
Rossini Clock Manual v1_0x
menu page to Binary.
Dither 1
button and power up the Clock. This sets the Clock to RS232 Text
Tera
Term
port to one of the PC's USB
button
–
Tera Term will
Power
button, or
from
Page 10
Software Issue 1.0x
February 2016
English version