Emerson FB2200 Manuel de remplacement sur le terrain - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de remplacement sur le terrain pour {nom_de_la_catégorie} Emerson FB2200. Emerson FB2200 16 pages. Flow computer i/o terminal board
Également pour Emerson FB2200 : Manuel de remplacement sur le terrain (16 pages), Manuel de remplacement sur le terrain (8 pages), Manuel de remplacement sur le terrain (14 pages), Manuel de remplacement sur le terrain (8 pages), Manuel de remplacement sur le terrain (16 pages)

FB2100/FB2200 Flow Computer I/O Termination Board Field Replacement Guide

Line up the new replacement I/O termination board with the screw holes and reattach it

using the eight screws. Torque screws to 4 to 6 in-lbs. (0.5 to 0.7 N m).

If present, place the optional 8-channel expansion I/O board on the posts, and carefully line it

up to avoid bending pins. Gently press the expansion I/O board down onto the I/O

termination board. Reattach the 8-channel expansion I/O board to the I/O termination board

using the four screws you removed in step 5. Torque screws to 1 to 2 in-lbs (0.1 to 0.2 N m).

10.

Take the CPU enclosure (with the HMI module attached) and line up the CPU enclosure's

captive fastening screws with their matching holes on the I/O assembly. Press the enclosure

screws onto the holes and hold it there while tightening each of the captive fastening

screws. Torque screws to 7 to 9 in-lbs. (0.8 to 1.0 N m).

11.

Connect the intermediate cable to the sensor module and make sure it has clearance.

D301805X012

November 2020