Emerson FB2200 Field Replacement Manual - Page 9

Browse online or download pdf Field Replacement Manual for Industrial Equipment Emerson FB2200. Emerson FB2200 16 pages. Flow computer i/o terminal board
Also for Emerson FB2200: Field Replacement Manual (16 pages), Field Replacement Manual (8 pages), Field Replacement Manual (14 pages), Field Replacement Manual (8 pages), Field Replacement Manual (16 pages)

Print Page

FB2100/FB2200 Flow Computer I/O Termination Board Field Replacement Guide

Line up the new replacement I/O termination board with the screw holes and reattach it

using the eight screws. Torque screws to 4 to 6 in-lbs. (0.5 to 0.7 N m).

If present, place the optional 8-channel expansion I/O board on the posts, and carefully line it

up to avoid bending pins. Gently press the expansion I/O board down onto the I/O

termination board. Reattach the 8-channel expansion I/O board to the I/O termination board

using the four screws you removed in step 5. Torque screws to 1 to 2 in-lbs (0.1 to 0.2 N m).

10.

Take the CPU enclosure (with the HMI module attached) and line up the CPU enclosure's

captive fastening screws with their matching holes on the I/O assembly. Press the enclosure

screws onto the holes and hold it there while tightening each of the captive fastening

screws. Torque screws to 7 to 9 in-lbs. (0.8 to 1.0 N m).

11.

Connect the intermediate cable to the sensor module and make sure it has clearance.

D301805X012

November 2020