adeptus 78101 Manuel d'instructions de montage - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de montage pour {nom_de_la_catégorie} adeptus 78101. adeptus 78101 12 pages. Cottage single drawer end table / nightstand
Imprimer la page
1
PREPARE PARTS BY INSERTING DOWELS
A
A
11
10
A
A
Prepare the parts for assembly by inserting dowels (part A) into the pre-drilled dowel holes in the following parts:
• Insert 2 dowels (part A) into the top of each side panel; 1 right facing side panel (part 02) and 1 left facing side panel (part 03).
• Insert 2 dowels (part A) into each side of the shelf (part 07).
• Insert 2 dowels (part A) into the front of each drawer side; 1 right facing drawer side (part 10) and 1 left facing drawer side
(part 11).
• Insert 2 dowels (part A) into both ends of each crossbar; 2 drawer crossbars (part 04) and 1 bottom crossbar (part 05).
2
ATTACH THE FEET TO THE LEGS
O=04
NOTE: The pre-drilled pocket holes are at the top of the side panels. The feet go on the opposite end.
Attach the 4 feet (part O) to the 4 legs attached to both of the side panels (parts 02 & 03) by screwing the foot
(part O) into the bottom of each leg clockwise just until tight. Do not try to force or over-tighten the feet as this
Foot
NOTICE:
07
A
A
03
A
A
02
CONTAINED
A
A
A
02
A
A
PRE-DRILLED POCKET HOLES
(TOP OF PANELS).
03
could cause the wood to split.
A=24
A
04
05
A
A
A
A
O
8 x 30
mm
Dowel
A
A
A
5 1