adeptus 78101 Manuel d'instructions de montage - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de montage pour {nom_de_la_catégorie} adeptus 78101. adeptus 78101 12 pages. Cottage single drawer end table / nightstand
Imprimer la page
5
ATTACH CROSSBARS AND SHELF TO
LEFT SIDE PANEL
PICTURED LAYING
B=05
4 x 30
mm
Screw
• Attach all crossbars and the shelf (parts 04, 05 & 09) to the Left side panel (part 03) by first aligning the dowels (part A) inserted
in step 1 with the pre-drilled dowel holes in the Left-facing side panel (part 03) as shown.
• Once aligned, push all crossbars and the shelf (parts 04, 05 & 09) into the the Left-facing side panel (part 03) until flush.
• Then secure each one using 5 of the part B screws, as shown.
• The part B screw should be just tight. Do not force or over-tighten as this could cause damage to the panel, crossbars and/or shelf.
6
ATTACH RIGHT SIDE PANEL TO
CROSSBARS AND SHELF
NOTE: Do not attempt to
complete this step with
the unit upright. It should
be flat on its front side
on a hard, clean surface.
B=05
4 x 30
mm
Screw
• Attach all crossbars and the shelf (parts 04, 05 & 09) to the Right side panel (part 02) by first aligning the dowels (part A) you
inserted in step 1 with the pre-drilled dowel holes in the Right side panel (part 02) as shown.
• Once aligned, push all crossbars and the shelf (parts 04, 05 & 09) into the the Right side panel (part 02) until flush.
• Then secure each one using 5 of the part B screws, as shown.
• The part B screw should be just tight. Do not force or over-tighten as this could cause damage to the panel, crossbars and/or shelf.
NOTICE:
NOTE: UNIT IS
FLAT ON ITS
FRONT SIDE.
A
CONTAINED
LEFT-FACING PANEL
A
A
A
04
B
04
B
02
A
A
A
B
B
A
09
B
B
05
03
A
A
B
A
A
09
A
B
B
05
RIGHT-FACING SIDE PANEL
A
A
04
B
04
03
LEFT PANEL
7-11