Emerson FB1100 Manuel de remplacement sur le terrain - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de remplacement sur le terrain pour {nom_de_la_catégorie} Emerson FB1100. Emerson FB1100 14 pages. Flow computer coin cell battery field
Également pour Emerson FB1100 : Manuel de remplacement sur le terrain de la carte de terminaison (18 pages), Manuel de remplacement (18 pages), Manuel de remplacement sur le terrain (20 pages), Manuel de remplacement sur le terrain (8 pages), Manuel de remplacement sur le terrain (8 pages), Manuel de remplacement (8 pages)

Imprimer la page
Emerson FB1100 Manuel de remplacement sur le terrain
FB1100/FB1200 Flow Computer CPU Module Field Replacement Guide
Flow Computer CPU board with solar/Enersys lead acid battery charge board Field Installed
Accessory Kit Part No. 399381-02-0 for use with UL Listed Model Series FB1100 and FB1200.
CAUTION
If your flow computer uses lead acid battery pack 399186-01-8 and you need to replace the CPU
and battery charge board, you must select kit 399381-01-0 because the 399186-01-8 battery is
not supported by the Enersys charge board.
1.
Remove the front and rear end caps. Remove the retaining clamps on the end caps (if
present) using a 3 mm hexagonal wrench.
Components of Retaining Clamp Assembly
1
Screw
2
Retaining Clamp
3
Washer
2.
Grasp the end cap.
Front End Cap
3.
Unscrew the end cap by turning it counter-clockwise until it comes off. Set the end cap aside
in a safe location.
Note
If you need more leverage, place a long screwdriver or other appropriate tool across the two
notches in the end cap to act as a pry bar.
Rear End Cap
D301802X012
November 2020
3